vMix streaming setup: send your show to a channel of your own

To stream from vMix to your own channel, open the Streaming window with the cog beside the Stream button, choose Custom RTMP Server, paste your channel's URL and stream name, pick a quality your upload can carry, and press Start. By the end of this guide you will have vMix sending to a channel with a link anyone can open on a phone, plus a short routine for checking the picture before your audience arrives.

By the Stream Brothers team

Every step was checked against the software's official documentation by independent reviewers before publishing. Last reviewed .

Before you start

Running order
  1. What to have ready first
  2. Step by step: point vMix at your channel
  3. Which quality settings should you pick?
  4. Will my connection keep up?
  5. Check the stream before you go live
  6. What goes wrong, and how to fix it
  7. When this setup is not the right fit
  8. Your questions

What to have ready first

Three things: vMix with your cameras and other inputs already showing a picture, a channel that accepts RTMP, and an upload speed you have measured on the line you will use. RTMP (Real-Time Messaging Protocol) is simply the way most video mixers hand a live picture to a server. Our live video channels take RTMP from vMix, OBS Studio, Wirecast, Larix or a hardware encoder, and play to viewers as HLS, a format that runs in any modern browser.

  • Your channel's details. A server URL that starts with rtmp:// and a stream name or key; some channels add a publishing username and password. Copy them from your channel's details.
  • A measured upload speed. Test on the same connection, in the same room, that you will stream from on the day. Our guide on upload speed for live streaming walks you through it.
  • A computer with room to spare. vMix treats CPU use that stays above roughly 70% in Task Manager as a sign of an overloaded machine.

Step by step: point vMix at your channel

Each label below matches the vMix screen.

  1. In the main vMix window, click the small cog next to the Stream button. The Streaming window opens.
  2. Open the Destination list and pick Custom RTMP Server. Two boxes appear: URL and Stream Name or Key.
  3. Paste your channel's server address into URL. Paste the address alone, with nothing added after it.
  4. Paste your stream name or key into Stream Name or Key. Copy and paste rather than typing; a single wrong character is enough for the server to turn the connection away.
  5. If your channel also gives you a publishing username and password, click Advanced and fill in Username and Password there.
  6. Under Quality, choose a preset (the next section helps), and leave Application set to FFMPEG.
  7. Click Save and Close to keep the settings for later, or Start to go on air (some versions label it Start All). While you are live the button turns red, and the Stream button in the main window lights up as well.

A Profile stores one complete set of streaming settings, so you can keep one for rehearsals and one for the real channel. Only one profile is active at a time: glance at which one is selected before you press Start.

Which quality settings should you pick?

If you are unsure, start with the default preset, 360p at 1.5 Mbps, which vMix describes as low to medium quality and fine for most broadband lines. Bitrate is how much data per second the stream uses; more bitrate means a sharper picture but needs a faster upload. To build your own preset, click the cog beside Quality to open the Streaming Quality window, and use these values as a starting point.

SettingWhat to chooseWhy
FormatH264vMix notes every provider and computer handles it; AV1 and HEVC have limited support and need a supported graphics card
Video Bit RatesBelow about 80% of your measured upload, and video plus audio within 5 Mbps on a Pro or Platinum channelLeaves room for the line to wobble; 5 Mbps is the channel's ingest limit
Encode SizeYour vMix aspect ratio, at 1080p or belowThe channel takes up to 1080p
ProfileMainBetter picture than Baseline, at the cost of more CPU
Presetveryfast (software encoding)vMix's suggested balance of CPU load and quality
Keyframe Frequency2 secondsThe vMix default, and a value some streaming providers recommend
Audio Bit Rate128 kbps AACvMix's figure for near-CD sound; FFMPEG sends AAC only

A keyframe is a whole frame sent in full; the frames between keyframes carry only what changed since.

Have a recent NVIDIA graphics card? Tick Use Hardware Encoder in the Streaming window. vMix then encodes on the card's NVENC chip, which takes a large load off the CPU. With it ticked, the Preset list changes to Low Latency HQ (the default) and P1 to P7, where P7 favours quality and P1 favours speed.

Will my connection keep up?

It will if your bitrate stays below about 80% of the upload you measured; vMix's own example is 1.6 Mbps on a 2 Mbps line. Here is the same rule worked through for a few lines:

Measured uploadHighest total bitrate to send
2 Mbpsabout 1.6 Mbps
4 Mbpsabout 3.2 Mbps
6.25 Mbps or more5 Mbps, the ingest limit on Pro and Platinum

On a patchy line, two settings in the Streaming Quality window help. Network Buffer is how many seconds vMix may hold back while the connection catches up; raise it if the line is unreliable, accepting more possible delay. Strict CBR holds the stream close to your chosen bitrate, trading away a little picture quality.

Check the stream before you go live

Rehearse at least once with the cameras, room and connection of the real event. The Free plan suits this: one channel for up to 10 viewers at a time, meant for testing your encoder and player.

  1. Press Start and watch the button. Orange means vMix is still connecting; red means your video is reaching the internet.
  2. Switch a phone to mobile data and open your channel's player link; that is the stream as someone at home gets it. Expect the phone to lag a little behind the room.
  3. Click the statistics icon in the bottom right corner of vMix. Source Dropped counts frames lost because a camera or capture card is too slow; Renderer Dropped counts frames lost because the graphics card is too slow. Both should stay at or near zero.
  4. Open the Encoders tab in the same window. Its Codec column tells you whether your stream is being encoded on the CPU or on the graphics card.
  5. Back in the Streaming window, click View Status for the technical detail of the running stream. It is the first place to look if the connection misbehaves.
  6. Let the rehearsal run as long as a real segment of your show. If nothing above changed colour or climbed, you are ready.

What goes wrong, and how to fix it

  • An error appears a few seconds after Start. Compare the URL and stream name with your channel's details, re-copy both; if your channel uses a publishing username and password, re-enter those under Advanced too.
  • The button stays orange for a long time. The connection or the server is unreachable, and vMix keeps trying to reconnect by itself. Check your internet first.
  • The button flips between red and orange every few seconds. vMix's knowledge base names three causes: an upload too slow for the bitrate (lower it), an overloaded computer (close programs, lower the quality, or tick Use Hardware Encoder), or a server far from you. Stream Brothers channels run in New York or Bucharest, on availability; if yours is far from where you broadcast, ask our support team about it.
  • The picture stutters but the button stays red. Check Source Dropped and Renderer Dropped in the statistics window; the trouble is on the computer or camera side, not the network.
  • You want to send to two places. With FFMPEG selected, the numbered buttons along the top of the Streaming window each hold a separate destination, five in current versions. They share Stream 1's quality unless you untick Use Stream 1 Quality, and multi-bitrate output is switched off while you use them.

When this setup is not the right fit

A few limits are worth knowing before the big day.

  • A big audience on the Free plan. It allows 10 viewers at a time and is meant for testing. Pro and Platinum open the channel to 1,000 viewers at once.
  • Anything above 1080p. Pro and Platinum channels take up to 5 Mbps at 1080p, so a 4K production has to be scaled down in vMix first.
  • Expecting an automatic recording. Live broadcasts are not saved into your channel's video library, so record a copy on your own computer if you want one.
  • Sound only. If your show has no picture, an internet radio station is the better home for it.

Help follows the plan too: email on Free, and phone and live chat day and night on Pro and Platinum. For an outdoor event with one camera, our guide to streaming a high school football game covers the rest of the day.

Give your show a channel of its own

Rehearse your vMix setup on the free plan, then open the channel to a full audience on Pro or Platinum when you are ready.

Your questions

Can vMix send to a channel that is not in its provider list?

Yes. Choose Custom RTMP Server under Destination and paste the URL and stream name your channel gives you. If the channel also has a publishing username and password, they go under the Advanced button. Nothing else needs to change for a custom server.

Should Application be set to FFMPEG or FMLE?

FFMPEG. It is free, installed with vMix, and is the option vMix recommends, sending H264 video and AAC audio. FMLE is a legacy choice that needs separate Adobe software, and vMix itself calls it obsolete.

How often should vMix send a keyframe?

Every two seconds. That is the default in the Streaming Quality window and a value some streaming providers recommend, so leave it unless your channel asks otherwise.

Why does my Stream button turn orange?

Orange is normal for a moment while vMix connects. If it stays orange for a long time, the connection or server is down and vMix is retrying. If it keeps flipping between red and orange, your upload, your computer or the distance to the server is struggling; lower the bitrate first.

Do my viewers need vMix or an app to watch?

No. The channel plays as HLS in any modern browser on phones, tablets, computers and smart TVs, and you can embed the player on your own website. Pro and Platinum also include your own Samsung and LG TV app at no extra charge.

Is it worth ticking Use Hardware Encoder?

If you have a recent NVIDIA graphics card, usually yes. vMix then encodes on the card's NVENC chip, so the CPU has far less to do while it mixes your cameras. The Encoders tab in the statistics window confirms the stream moved to the GPU.