Gather these four things first
You need a reasonably recent phone, the Larix Broadcaster app, a channel that accepts RTMP, and an internet connection with enough upload. RTMP is simply the delivery method most streaming apps use to hand video to a server. Larix runs on Android 7.0 or later and on iOS 16.0 or later, according to its maker, Softvelum, and the streaming itself costs nothing; paid Premium extras include H.265 video and three or more connections at once.
- A channel to send to. Our live video channels accept Larix as an encoder and turn what it sends into an HLS link your audience opens straight in a web browser, with no app to install. The Free plan exists so you can try your phone and player before anything important, with room for ten people watching.
- Upload speed. Your video bitrate plus your audio bitrate has to fit inside what your connection can send, with room to spare. Our guide to upload speed for live streaming shows how to measure it where you will actually stand.
- Power. A charger or a good power bank. Softvelum's own production advice is to keep the phone plugged in.
- Optional sound. Larix works with Bluetooth audio and, on Android, USB audio devices, so a clip-on or handheld microphone is an easy upgrade later.
Where do I find my stream address?
Your stream address is in your channel's dashboard, among the encoder settings: a server address and a stream name. Larix wants them as one line, so you join them yourself. If you cannot spot them, open a ticket in our help centre and ask where they are.
The server part starts with rtmp:// (or rtmps:// if that is what your dashboard shows), then the host name, an optional port and the application name. The stream name goes after it, separated by a single slash. Softvelum's documentation gives this pattern:
rtmp://yourserver.com:1935/live/streamname
Copy and paste the values rather than typing them. One wrong letter in the stream name is the most common reason a phone connects and then nothing shows up on the channel. Treat the stream name like a password: anyone holding it can broadcast to your channel.
Add your channel as a connection in Larix
- Install Larix Broadcaster from the App Store or Google Play and open it. Allow camera and microphone access when the phone asks, or the preview stays black.
- Tap the gear icon on the preview screen to open the settings.
- Choose Connections, then New connection.
- Give it a name you will recognise, such as "Sunday service".
- Paste your joined address into the URL field.
- Set the mode to video plus audio. Softvelum notes that some receivers expect both tracks, so do not send video alone.
- If your dashboard also lists a publishing username and password, set Target type to RTMP authentication and fill in Login and Password. If it lists none, leave Target type on Default.
- Save the connection, go back to the Connections list and make sure your new entry is the one switched on.
- Return to the preview and tap the round record button. Within a few seconds your channel's player should show your picture.
If the button turns red but your player stays blank, give it half a minute and reload the player. If it is still blank, check the URL against the dashboard character by character.
Video and audio settings that suit a phone
Start with 720p at 30 frames per second and the app's suggested bitrate, then raise things only after a long test goes well. Bitrate means how much data per second the stream uses; higher looks sharper but needs more upload. When Bitrate matches resolution is on, Larix picks these video bitrates for you:
| Resolution | Larix default video bitrate | Fits a 5 Mbps channel? |
|---|---|---|
| 480p | 1,000 kbps | Yes, with lots of room |
| 540p | 1,500 kbps | Yes |
| 720p | 2,000 kbps | Yes, a good first choice |
| 1080p | 3,000 kbps | Yes, if your upload is strong |
| 2160p (4K) | 4,500 kbps | Not useful here: the channel plays up to 1080p |
Softvelum notes that choosing 50 frames per second or more multiplies those figures by 1.6. A Pro or Platinum channel accepts 1080p with an ingest ceiling of 5 Mbps, so keep video plus audio comfortably under it. On iPhone you choose bitrate from a list; on Android you type the number.
- Codec: H.264 is supported in every protocol Larix offers. H.265 is a Premium feature (with Bitrate matches resolution on, Larix halves its default bitrate for it), so it is not needed for a first broadcast.
- Keyframe interval: how often the encoder sends a full picture rather than just the changes. Shorter intervals let new viewers start sooner; 2 seconds is the value Softvelum uses in its own setting examples.
- Frame rate: Larix treats it as a request, not a promise, on iPhone and Android alike: the phone's own encoder decides the final rate, so the receiver may report a different figure than the one you set.
- Audio: an audio bitrate around 128 kbps is the figure Softvelum uses in its examples. If an external sound card misbehaves, check that it runs at 48000 Hz or 44100 Hz.
Will my stream survive a weak signal?
Mostly yes, if you turn on adaptive bitrate, which lets Larix lower the bitrate when the network struggles and raise it again when things recover. It is off by default. The app offers these modes:
- Logarithmic descend steps down gently and tries to climb back every minute. Softvelum suggests it for good networks, such as steady Wi-Fi.
- Ladder ascend cuts hard first, by two thirds, and works its way back up. It suits mobile data with heavy losses.
- Hybrid approach scales the bitrate by how many packets actually arrive. On Android it works only with SRT, so an Android phone sending to an RTMP channel should use one of the first two.
- Variable FPS is an extra option that also lowers the frame rate to save data.
Larix also has a Reconnect timeout setting, the number of seconds Larix waits before trying again after a drop. A short value brings you back quickly once the signal returns. If you get stuttering on a computer encoder too, our guide to dropped frames in OBS explains how to tell a network problem from an overloaded machine.
Keeping the phone going until the last minute
- Plug the phone in or fit a power bank before you go live.
- Switch off live rotation and image overlays if you do not need them; Softvelum says both add power use and heat.
- On iPhone, stay in Larix for the whole broadcast. When the app goes to the background, iOS stops the camera and only sound carries on.
- On Android, Larix can keep sending with the screen off, which saves energy and heat. Softvelum lists background streaming among its Premium features.
- Rehearse for twice the length of the real event; Softvelum's advice is two hours of testing for a one-hour show.
- Once the test passes, leave the settings alone and hold off app updates until the event is over.
Live broadcasts are not saved into your channel's video library. If you want a copy for later, turn on Larix's own recording to the phone. On iPhone recordings can go to Photos or iCloud Drive; on Android 8 and later you can choose the folder, including an SD card. Check you have free space first.
When a phone is not the right tool
A phone is perfect for one camera, one voice and a place with good signal. It struggles when you need several cameras, lower-third titles, slides, or a show that runs all day in a hot room. For those, a computer running OBS Studio or vMix does more. Our guide to streaming high school football weighs a phone running Larix against a camera and laptop for a full game.
Between broadcasts, Pro and Platinum keep the screen busy for you: their round-the-clock TV station loops programmes from your uploaded library, so early arrivals never face an empty player.