OBS settings for streaming: a beginner's walk through every screen

The OBS settings for streaming that matter are few: a Custom server holding your channel's address and stream key, a constant bitrate kept below both your channel's limit and about three quarters of your upload speed, a keyframe every 2 seconds, and a picture size your computer can encode without strain. By the end of this guide you will have OBS Studio sending a steady picture to your own channel, checked on a phone before anyone tunes in.

By the Stream Brothers team

Every step was checked against the software's official documentation by independent reviewers before publishing. Last reviewed .

Before you start

Running order
  1. What you need before you open Settings
  2. Connect OBS to your channel
  3. Simple or Advanced output mode?
  4. How high should the bitrate be?
  5. Picture size, frame rate and keyframes
  6. Get the sound right
  7. Test it before anyone is watching
  8. Save your settings as a profile
  9. Your questions

What you need before you open Settings

You need three things: OBS Studio installed, a channel to send to, and a rough idea of your upload speed. The channel gives you an RTMP address (RTMP is the way an encoder like OBS hands live video to a server) and a stream name or key. Both appear in your channel dashboard; copy them rather than typing them, because one wrong character and the server turns the connection away.

  • OBS Studio, any recent version. When it first opens, the Auto-Configuration Wizard offers to tune it for you; it is also under the Tools menu. It is a fine starting point, and this guide shows you how to check what it chose.
  • A channel. A live video channel takes RTMP from OBS and plays to viewers as HLS, the format phones, tablets, computers and smart TVs play in a browser.
  • Your upload speed, measured on the connection you will really stream from. Our guide to upload speed for live streaming shows how to measure it honestly.

Connect OBS to your channel

Connecting takes one screen, Settings → Stream, and two copied values.

  1. Open Settings (bottom right of the main window) and choose Stream on the left.
  2. Set Service to Custom.
  3. Paste your channel's RTMP address into Server. Paste only the address; the stream name does not get added to the end of it.
  4. Paste the stream name or key into Stream Key.
  5. If your dashboard also shows a publishing username and password, tick Use authentication and paste them in. That login is the channel's own, separate from your account sign-in.
  6. Click Apply. Nothing visible happens yet; the test comes at the end.

Your stream key works like a password for your channel. Keep it out of screenshots, shared screens and chat messages, and give it only to the people who run your broadcasts.

Simple or Advanced output mode?

Start in Simple mode when a bitrate and an encoder are the only choices you care about; switch to Advanced when you want to set the keyframe interval and rate control yourself. The choice is the Output Mode box at the top of Settings → Output. The project's own guidance calls Simple the easier choice for most people, and its presets already use a keyframe interval of 2.

In Advanced mode, open the Streaming tab. Pick the Video Encoder (the part of OBS that squeezes your picture into a stream), set Rate Control to CBR, which means constant bitrate, enter your Bitrate, and set Keyframe Interval to 2.

Encoder you will seeWhat it usesGood to know
x264Your processorWorks on any computer; the CPU Usage Preset veryfast is the project's baseline
NVIDIA NVENCAn NVIDIA graphics cardNeeds a GeForce 750 Ti or newer; Turing cards (GTX 1650 rev 2 and up) give the best results
AMD (AMF)An AMD graphics cardCheck AMD's plugin notes for which cards work
QuickSync (QSV)Intel graphics built into the processorHaswell (Core i 4xxx) or newer recommended
Apple VT H264Apple Silicon MacsOn Intel Macs it cannot stream, so use x264 there

Hardware encoders take the work off your processor, which is why OBS generally suggests them. Older ones give a softer picture, so on an older graphics chip x264 may look better if your processor keeps up.

How high should the bitrate be?

Set the video bitrate to the lower of two numbers: about 75% of your measured upload speed, and what your channel accepts. Bitrate is how much data per second the stream uses, counted in kbps (thousands of bits per second). The 75% figure is the starting point the OBS project gives for an unsteady connection; the rest of your upload is headroom for other traffic and for dips. A Pro or Platinum channel takes up to 5 Mbps (5,000 kbps) at 1080p, so keep your video bitrate a little below that and leave some room for the audio as well.

Upload you measured75% of itVideo bitrate to enter
3 Mbps2,250 kbpsAbout 2,250, and consider 720p
5 Mbps3,750 kbpsAbout 3,750
8 Mbps or more6,000 kbps or moreStay safely under 5,000 so video plus audio fits the channel

Settings → Advanced → Network has Dynamically change bitrate to manage congestion (Beta). It lowers quality instead of dropping frames when your line struggles. Treat it as a seatbelt, not a fix: a bitrate that fits your line is still the answer.

Picture size, frame rate and keyframes

Settings → Video holds two sizes and a frame rate. Base (Canvas) Resolution is the size of the scene you arrange; Output (Scaled) Resolution is the size actually sent. Keep the canvas at your screen or camera size and lower only the output if you need to.

  1. Set Output (Scaled) Resolution to 1920x1080 if your bitrate sits near the top of the range, or 1280x720 if your upload is modest.
  2. Set the frame rate (FPS, frames per second) to 30 for talks, services, lessons and most events. Going from 60 to 30 cuts the work both for drawing scenes and for encoding.
  3. Back in Output, confirm the keyframe interval is 2. A keyframe is a complete frame that a viewer's player can begin on; the frames between only record what changed.

If OBS shows an Encoding overloaded message or the picture stutters, the computer is short of breath. Lower the output resolution or the frame rate first, close other heavy programs, and trim busy scenes with lots of filters or browser sources.

Get the sound right

OBS captures desktop audio and your default microphone out of the box, so most of the work is checking it hears the right things. Watch the meters in the Audio Mixer while you speak and while a video plays. If a meter stays still, or the wrong microphone moves it, open Settings → Audio and pick the devices by hand.

Leave the sample rate and audio encoder on their defaults unless the help article for your channel names different values. For a church or school with a mixing desk, feed the desk into one input and mute the computer's own microphone, so nobody hears the room twice. If you also run an audio-only service, an internet radio station takes a separate encoder feed of its own.

Test it before anyone is watching

Run a test of a few minutes before your first real broadcast; the OBS project recommends exactly that, and it catches nearly every mistake above.

  1. Click Start Streaming in the Controls dock. The button changes to Stop Streaming once OBS is sending.
  2. Open your channel's player on a phone using mobile data, not your home Wi-Fi, which shows you the stream the way a viewer gets it.
  3. Talk, move and play a short clip for a few minutes. Check that sound and lips match and the picture stays smooth.
  4. Open the Stats dock and look at dropped and skipped frames. If either climbs, our guide to OBS dropped frames tells you which setting to change.
  5. Click Stop Streaming and adjust one setting at a time.

If the connection keeps failing, check the Server and Stream Key again, then make sure security software is not blocking OBS. Help is available around the clock, including an assistant that can inspect your channel; reach it from support.

Save your settings as a profile

Once the test looks right, save it as a Profile, and export a copy, so you can get back to working settings if someone changes them by accident. A Profile keeps the Stream, Video and Output settings together; scenes live separately in Scene Collections. Use Profile → Duplicate to make a copy you can experiment with, and Profile → Import/Export to carry the settings to another computer as a file.

An exported profile includes your stream settings, key included. Store the file like a password and do not post it in a group chat.

Start your channel

Point OBS at a channel of your own: RTMP in, a player that works on every screen, and a free plan to rehearse on.

Your questions

Is Simple mode good enough for a weekly service or class?

Usually, yes. Simple mode asks only for a bitrate, an encoder and an audio quality, and its presets already use a keyframe every 2 seconds. Move to Advanced if you need to change rate control or the keyframe interval yourself.

Should I stream at 60 frames per second?

Only if the content moves fast and both your computer and upload have room. At the same bitrate, 60 fps shares the data between twice as many pictures, and it gives your computer more encoding work. For speech, worship and lessons, 30 fps is the calmer choice.

Why does my picture look blocky when people move?

The bitrate is too low for the picture size. Either raise the bitrate if your upload and your channel allow it, or lower Output (Scaled) Resolution to 1280x720 so the same data covers fewer pixels.

Can I try my settings without an audience seeing mistakes?

Yes. The free video plan exists for testing your encoder and player, with room for up to 10 viewers at a time, so you can rehearse with a couple of helpers. Pro and Platinum add room for 1,000 viewers at once when you are ready.

Will the Auto-Configuration Wizard set everything for me?

It gets close. It tunes OBS to your hardware and network, but it does not know your channel's limit, so check its bitrate against your channel's limit (5 Mbps on Pro and Platinum) and confirm Keyframe Interval is 2 afterwards.